February 2024
Time to make: 1 hours
Finishing: .5 hour
Original design: Bill Macfarlane
I do a lot of my Philmont slides with reclaimed pallet wood so why not do a pallet slide. The ironic part is there is no pallet wood in this slide.
Using coffee stirrers I created the main 2x4 supports by gluing 3 coffee stirrers together with super glue. When dry I cut them to size and also cut the deck/bottom pieces. To assemble, I used super glue the deck pieces to the supports and when dry, the bottom pieces were glued to the slide. Super glue was used as a finish for the slide.
No comments:
Post a Comment