Hungry Bear

Early August 2010

Time to carve: 5 hours
Finishing: 2 hours

This was a tricky slide to carve! Carved from maple for it's strength (and because I have a good supply, hollowing out the different areas necessary was hard to do. I roughed out as much as I dare do with the band saw but I had to depend on a sharp knife to pull this off. When I finally finished carving, I did not thing the neckerchief would fit through the tiny arm holes. After trying it out, before painting it, I began to see why it was designed like this. The slide "hugs" the neckerchief giving the appearance of the bear peaking out. Kewl! Painted with craft paints, following the article's instructions, and finished off with poly.

Hungry Bass

Early August 2010

Time to carve: 4 hours
Finishing: 2.5 hours

What an unusual slide! I started this slide a couple of times because I just could not get the opening in the mouth quite right. Each time I had to adjust the fish pattern to be larger than I was expecting. The hard part was getting the hole large enough to accept the neckerchief and deep enough to cut out the gills so it would meet the hole in the mouth. Once this was accomplished shaping

the rest of the fish was really easy. I really hated to go much father since the maple fish body looked so good but I still had to add the fins on the back and bottom of the fish. The original pattern called for leather so I found some stiff leather and cut the fins out. I notched the wood and glued the fins in place using some super glue. Painting according to the directions and finishing it with a couple of coats of Poly.

Steer skull

Mid July 2010

Time to carve: 3.5 hours
Finishing: 2 hours

Started this one at summer camp too...but just barely. Carved from maple it is one of the more unusual slides
I've made. I had trouble visualizing this but as I carved I seemed to find my way. (The closest I have been to a long horn steer skull is the on the screen at the movies.) The eye and horn sockets had to be shaped at a different angle than I am use to seeing. But I digress...the slide was painted with craft paints and when dry, given a black wash to bring out the cracks in the skull. The horns were made from some scrap plastic trim I had laying around.They were rounded and heated to form the bends, and then glued into place. A couple of coats of poly finish it off.

Monkey

Mid July 2010

Time to carve: 3.5 hours

Finishing: 1.5 hour

Well it's during the third camp of the month, (and the only one I'm staying at) I'm carving the Monkey slide. Now the thing that is really funny is while I packed my carving stuff, I forgot to bring any finished slides for a neckerchief. So I've got two choices, go without a neckerchief during flag ceremony or wear an unfinished slide. I went with the unfinished slide but what was really interesting was the response of scouts from other troops as they watched the slide develop. By week's end, I kept getting asked "Is that the same slide?", and "How did you make that?". But probably the most surprising to most (especially those taking First Aid MB) no cuts and no blood was shed making this slide. Painted using craft paints and sealed using a couple of coats of poly, the final step was gluing on the eyebrows and ear fuzz. While it doesn't show up well in the photo, they both are made from some feather fuzz and super glued to the slide.

Padlock

Early July 2010

Time to carve: 2 hours

Finishing: 1 hour

July is a busy month, so much going on between Scout camps and other camps. I started this slide while waiting for the closing ceremony of NYLT at Rotary Scout Camp. Made from maple, it didn't take long to flesh this one out as I waited for my scouts to arrive in there patrols. A bit of sanding and I was ready for a key. Oddly enough, I had a key

that came as swag with a old text based computer game. (Yeah, I've been around computers for a long time.) I made the keyhole slot and fitted the key. Painting the lock with some chrome spray paint, it took a couple of coats with light sanding in between to give it a smooth brilliance. When dry, I glued the key in place. Wearing the slide is easy because the neckerchief is brought through the hasp.

A Rugged Scotsman

Late June 2010

Time to carve: 6.5 hours
Finishing: 1.5 hour

Aye, I been looking forward to carving this one. Carved from maple it is a mix of a chip and finished carving. Though roughed out on the band saw, there was quite a bit of carving involved with this slide. (Lots of sharping too.) I finished this up with craft paints and a couple of coats of poly. When it was done, I almost felt like I should have been carving this under moonlight - the "Lantern". Loch Sloidh

Flashlight

Late June 2010

Time to carve: 0 hours
Leather work: 1 hour
Finishing: .5 hour

I have had this slide in the back of my mind for a while now but couldn't seem

to find the right flashlight. Then when helping my daughter clean her room, I came upon a little flashlight that would be just right. My daughter didn't want it anymore (because it didn't work) so I set forth fixing it. A bunch of hearing aid batteries and some fine sand paper latter I had a working flashlight.
Next came the the leather part of the slide and I began by laying it out on paper first. Once I had worked out, I cut it out,punched out holes for the flashlight and around the outside edge for lacing. Somehow plastic lacing, or gimp, just didn't look right so I decided to use a natural string instead.